Custom cabinets · Longmont · Boulder County, CO
Custom cabinets in Boulder County, cut to fit your walls
Illustrative example, not our work
What we do
Custom cabinets sized to your kitchen, not a catalog
Spindle Woodworks is a custom cabinet maker serving Boulder County, Colorado. We measure your space, design the layout with you, then cut every part on a CNC router and assemble and finish the cabinets in our shop. We install them ourselves or deliver them ready to install for your contractor.
Stock cabinets come in 3-inch width steps, so the inches left over on an odd wall get covered with filler strips. Ours are sized to the inch instead. Every job uses the same short list of options: frameless (full-access) boxes (or face-frame with inset doors), 3/4" plywood cabinet boxes, Blum soft-close hinges and Blum full-extension, soft-close undermount drawer slides, three door styles and a curated finish palette. Fewer options keep pricing predictable and mean a mudroom or vanity can match the kitchen exactly.
Published pricing
Know the price before you call
Three packages, priced per linear foot and installed in Boulder County, with a standard set of pulls and knobs included. A typical 20-foot kitchen:
- Essentialfrom $750/ft · $15,000
- Selectfrom $1,050/ft · $21,000
- Signaturefrom $1,450/ft · $29,000
Contractor, builder or designer? How we work with the trade.
Kitchens first, any room after
Cabinets we build
Most clients start with the kitchen. The same door styles and finishes carry into the rooms around it.
Kitchen cabinets
Full kitchens, islands, coffee bars and tall pantry walls. Our main focus.
Bathroom vanities
Floating or floor-standing vanities, linen towers and drawers built around plumbing.
Laundry & mudroom cabinets
Benches, lockers and boot storage that stand up to Colorado snow and mud; laundry storage over the machines.
Pantries & built-ins
Walk-in and cabinet pantries, appliance garages, bookcases, media walls and window seats.
Photos are illustrative examples of the styles we build.
Why CNC
Precision you can see in the gaps
- Exact, repeatable parts. Every side, shelf and back is cut from the digital design, with shelf-pin and hinge holes drilled in the same pass.
- Tight, even reveals. Square boxes mean doors and drawer fronts line up with consistent gaps across a whole wall.
- Any size, no wide filler strips. Cabinets are cut to your measurements, not rounded down to the nearest catalog size.
- Matching rooms. The same files and finishes make it simple to add a vanity or mudroom that matches later.
Service area
Serving homes across Boulder County
We measure and design in person, so we keep our service area tight. Longmont and Boulder are home base. We also work in nearby towns.
Before you buy
Straight answers about custom cabinets
Guide
How much do custom cabinets cost in Colorado?
Price per linear foot, what a typical kitchen costs, and what drives the number up or down.
Read the guideGuide
Custom vs. semi-custom vs. stock cabinets
What actually changes between the three tiers: sizing, materials, lead time and price.
Read the guideGuide
Frameless vs. face-frame cabinets
How the two construction styles differ in storage, look, hinges, cost and durability.
Read the guideGuide
Filler strips on stock cabinets: what are your options?
Why stock cabinets need fillers, which fillers a custom kitchen still needs, and how re-planning, semi-custom and custom compare.
Read the guideGuide
Is CNC cabinetry better than traditional shop work?
What a CNC router does, what it improves, what it can’t fix, and how to judge any cabinet shop.
Read the guideGuide
Custom cabinets vs. Home Depot cabinets
Sizing, box material, price per foot, lead time and who measures and installs: a small Longmont CNC shop against big-box in-stock and special-order cabinets.
Read the guideGuide
Matching cabinets for the kitchen, bathroom and mudroom
What has to match, what changes from room to room, ordering together or later, and what it costs.
Read the guideAlso see custom cabinet questions, answered and how our cabinet process works.
Questions
Frequently asked questions
Where does Spindle Woodworks work?
We build custom cabinets for homes in Boulder County, Colorado: Longmont and Boulder first, plus Louisville, Lafayette, Erie, Niwot and Superior. If you're just outside that area, send a quote request and we'll tell you if we can take the job.
What kinds of cabinets do you build?
Kitchen cabinets are our main focus. We also build bathroom vanities, laundry and mudroom cabinets, pantry cabinets and built-ins like bookcases and media walls, using the same door styles and finishes so every room can match the kitchen.
How much do custom kitchen cabinets cost in the Boulder area?
Spindle Woodworks packages start at $750 per linear foot installed (Essential), $1,050 (Select) and $1,450 (Signature), with a standard set of pulls and knobs included, so a typical 20-foot kitchen starts around $15,000. For comparison, Denver-area cost guides put custom cabinets at about $500 to $1,200 per linear foot installed (HomeGuide, checked October 2026). Our instant estimate shows a range for your linear feet.
What does it mean that your cabinets are made on a CNC?
A CNC router cuts every cabinet part from a digital design, so sizes, joinery holes and hinge bores are repeatable to a fraction of a millimeter. That gives tight, even gaps between doors, boxes that assemble square, and parts that match exactly from room to room.
Do you work with contractors and designers?
Yes. We build to a designer's drawings or a contractor's schedule, deliver cabinets finished and ready to set, or install them ourselves, and supply shop drawings for the plumber, electrician and countertop fabricator. Our trade page explains pricing and scheduling; send plans or a sketch with your quote request.
Spindle Woodworks
Tell us about your cabinets
Send a few details and rough measurements. Sam replies within one business day with next steps and a ballpark range.